|Trolley Running Speed:
|Crane Running Speed:
|Cabin Control/wire Rope Remote Control
|3 Phase 380V 50hz Or Request
gantry lifting equipment,
10 Ton Workshop Double Beam Driven Gantry Crane With Electric Trolley
1. Girder structure
Single girder and double girder are different; Different main beam structure, bearing capacity is different, if it is often lifting 5 tons, appropriate to buy some larger, to avoid a certain overload, unable to complete the work, more embarrassing. Economic conditions are good, the budget is adequate, as far as possible to choose a bit more weight, this is a wise choice.
2. Girder span problem
According to the different use site of gantry crane, what needs to be considered is whether it is convenient to pass the car below, to avoid occupying the place, resulting in other inconvenience, is also very annoying, after installation, can not be changed.
3. Whether there is a cab
Before installation, you need to consider the number of driving, if often used, for the sake of safety, it is best to have a cab, so that the personnel can stand in the cab to watch the following work site, a wide field of vision to increase safety, not easy to lift, meet other personnel.
4. Whether frequency conversion structure should be installed
Frequency conversion is more power saving, safer operation, driving is easier, but the cost is high, if the small and medium-sized enterprises, you can not consider, in order to save costs.
5. Lifting is mainly trolley and electric hoist
The lifting structure of each gantry crane is very important. If there is no good lifting or operation, the operation speed will be slow and the carrying capacity will be weak.
6. Consider the job level
For cranes with large tonnage, try to choose higher ones, such as A6, and smaller ones. If the carrying capacity is low, try to choose A3.
Crane Wheel Instruction
When we were in the use of gantry crane, in fact, in order to meet the needs of they can be moved, we are the structure of the body, this is to bring the necessary degree of convenience, but we need to know is, usually in the process, we to this aspect of the maintenance work can not be ignored, because it is a part of the gantry crane, such as for the wheels, we've had a lot of attention to place, in this small make up to today and you talk about the wheel above, generally we need to pay attention to the problem, first of all we know is that the tyres are critical to the inspection work, Because in general can be used to the place of gantry crane, in fact, the road surface quality is bad, so corresponding by the friction of the tires is also on the increase, in this way, we not only to check pattern of wear degree, also note it if there is any air leakage phenomenon, this is very important, because the gantry crane in general use degree of the risk is very big, we should more attention in this aspect, above the plumpness of the tyre note that because of the gantry crane usually hanging and gravity is very big.
In lifting equipment, a lot of consumers chose gantry crane. So what are the advantages of this device? Longmen crane production industry experts for consumers to do a simple introduction. The movement of gantry crane is very flexible and light, so it can avoid the obstacles in the working range very well, while ensuring the precise position.
Gantry crane lifting weight is the key for consumers to choose it, it can well meet the lifting requirements of consumers, to avoid problems caused by heavy lifting equipment.
Safety of gantry crane is the key reason for everyone to choose this kind of equipment, it has a lot of protection functions, at the same time the failure rate is very low, can ensure the safety of the operator and the lifting goods.
Package & Delivery
Contact Person: Mr. June Chao
Tel: 0086 18568525956