European Style Overhead Crane,
Industrial Single Girder EOT Crane,
A3 Single Girder EOT Crane
Industrial Single Beam European Style Overhead Crane 5 Ton
European Style single beam overhead crane configuration is made up of a single bridge girder, two end carriages and a hoist with trolley, which runs along the bottom flange of the bridge girder between the end carriages.
|Speed||Lifting||MD1 hoist||m/min||8/0.8 (7/0.7)||3.5/0.35|
|CD1 hoist||8 (7)||3.5|
|Traveling of electric hoist||20||20|
|Traveling of cable trolley crane||20/30||20/30|
|Width of trail||37~70mm||37~70mm|
|Operational Model||remote control; ground handle||remote control; ground handle|
|Power Supply||According to your demands||According to your demands|
|We can design and manufacture all kinds of non-standard product according to your requirement
Product Main Advantages
1. European box girder( light weight )
2. Whole slab without but weld(stronger than the spliced );
3. High accuracy;
4. Derusting grade:Sa2.5;
5. Painting: epoxy zinc-rich paint ,120 um thick;
Reasonable structure,strong bearing capacity.
Reducer anti-fall, anti-lock.
Outdoor hoist with a rain cover.
Low noise, soft starting and stopping.
Parts Of Crane
The main beam and end beam are packed with three layers of plastic film, and the bottom two iron blocks are set off, generally two are packed and stacked together.
The remaining important electrical control and scattered spare parts shall be equipped with special wooden box device for export. After the box is sealed, it shall be wrapped with plastic film.
After all packed products are loaded into containers, they shall be fixed in containers from four directions to ensure that they will not shake.
Contact Person: sales