|Lifting Speed:||5-15M/MIN||Trolley Running Speed:||20-40M/MIN|
|Crane Running Speed:||50-100M/MIN||Control Method:||Cabin Control/wire Rope Remote Control|
|Protection Grade:||IP54||Insulation Grade:||F|
double girder crane,
workstation bridge crane
10 Ton Double Girder Electric Trolley Motor Drive Overhead Bridge Crane
10 Ton Double Girder Electric Trolley Motor Drive Overhead Bridge Crane mainly consists of bridge, trolley travelling mechanism, crab and electrical appliances, and is divided into 2 working grades of A5 and A6 according to the use frequency.
10 Ton Double Girder Electric Trolley Motor Drive Overhead Bridge Crane is widely used to upload and move of normal weight in the fixed crossing space and also can work with various special-purpose hoist in special operations.
Matters Needing Attention
10 Ton Double Girder Electric Trolley Motor Drive Overhead Bridge Crane structure stable lifting, the bearing capacity of the product is large, so it can easily transport the weight, the use of the equipment for our work has brought great convenience. But we also need to pay attention to its safe operation, so that not only can ensure the service life of the machine, but also for our own personal security
It should be confirmed that the electric double-beam crane can be started after the cage door is reliably closed. The opening and closing of the cage door shall not be used as the switch for the operation and stopping of the electric double-beam crane. Cargo handling should be handled lightly to minimize impact on the car. When a car enters the car, effective measures should be taken to prevent the car from hitting the car wall and door. When loading or unloading the goods, it is necessary to press the stop switch of the corresponding floor station and confirm whether the stop protection device is in the protection position before loading or unloading the goods, and minimize the time to enter the cage. The weight of the loaded goods should be strictly controlled, overload operation is strictly prohibited, and long pieces of goods should not be transported by opening the cage door.
Electric double beam cranes have made significant improvements in this area, so there is no need to worry too much. A key step in the improvement is the installation of relevant safety devices, such as anti-collision device, limit device, anti-overload device, etc., in addition to the dangerous voltage alarm device can not be ignored.
10 Ton Double Girder Electric Trolley Motor Drive Overhead Bridge Crane is not allowed to carry inflammable and explosive dangerous goods. When waiting for goods to be loaded, the personnel shall not stand between the cage door and the floor door, but stand outside the floor door and wait. No one is allowed to use the lift. During shift operation, the security management or operation personnel should handle the handover procedures before and after work.
During the work period to concentrate on, do not allow the operation of other irrelevant things, not to leave the job. Take good care of the equipment and keep the electric double-beam crane and the surrounding area clean and tidy. No sundries shall be placed on the top of the cage. It is forbidden to short-circuit or dismantle the safety switch of electric double-beam crane. It is forbidden to run the equipment when the floor door or cage door is open.
10 Ton Double Girder Electric Trolley Motor Drive Overhead Bridge Crane safety management, operators must pass professional training and assessment. Operators should be familiar with the basic structure and performance parameters of electric double-beam crane. Master operation method and use of safety device. Before the electric double-beam crane is put into use every day, the safety management or operation personnel should open the key of the operation box, and carry out no-load test operation, carefully check whether the main parts and safety devices and facilities are in good condition, after confirming that there is no abnormal condition in the operation of the equipment, the official operation can be conducted. The goods in the cage of electric double-beam crane should be placed securely to prevent deviation during operation. When transporting heavy goods, the goods should be placed in the middle of the cage to prevent the cage from tilting.
10 Ton Double Girder Electric Trolley Motor Drive Overhead Bridge Crane is easy to install and maintain, it is an economical and practical low floor to replace the electricity between the ideal transport equipment.
Package & Delivery
Contact Person: Mr. June Chao
Tel: 0086 18568525956