|Lifting Speed:||5-15M/MIN||Trolley Running Speed:||20-40M/MIN|
|Crane Running Speed:||50-100M/MIN||Control Method:||Cabin Control/wire Rope Remote Control|
|Power Supply:||3 Phase 380V 50hz Or Request||Colour:||Request|
double girder crane,
workstation bridge crane
10Ton Capacity LH Type Electric Overhead Crane With Hoist Trolley
10Ton Capacity LH Type Electric Overhead Crane With Hoist Trolley is a bridge crane with solid electric hoist (seat type or hanging type) as the lifting mechanism (main hook and auxiliary hook), which is installed on the trolley. This series of products has two varieties of ground control and cab control, 144 specifications.
10Ton Capacity LH Type Electric Overhead Crane With Hoist Trolley is simple in structure, light in weight, and cheap in price. It is mainly used for general lifting, loading and unloading operations in machinery manufacturing workshops, warehouses, assembly, and maintenance of hydraulic drills. The industrial environment temperature of this product is -25 ～ 40 ℃. It is not suitable for mediums with explosion or fire hazards and where the relative temperature is greater than 85% and is full of corrosive gases. It is also not suitable for lifting molten metals and toxic, flammable and explosive materials.
Structural characteristics and working principle
This series of products consists of four main parts: bridge frame, trolley, trolley operation and electrical. Use fixed wire rope or chain electric hoist as the lifting mechanism. The crane assembly test should meet the requirements of JB / T3695-2008 "Electric Hoist Double Beam Bridge Crane". When installing the crane, it must be installed according to the provisions of the drawings.
When the crane is disassembled for transportation and product installation, the connection of the end beam must be disassembled and assembled according to the drawings.
10Ton Capacity LH Type Electric Overhead Crane With Hoist Trolley adopts frequency converter for speed regulation, and the electrical appliances adopt Schneider brand. The operation of each crane mechanism is controlled by a remote control or by a ground control button box. The remote control or ground control button box cooperates with the electric control equipment to realize the starting, speed regulation and reversing braking of the motors of each mechanism. The electronic control system ensures that the main controller or ground control button box of the operation mechanism of the cart is operated from slow to fast or directly to high speed, which makes the running motor transition from slow start to smooth operation. When the master controller is operated to control the running motor from fast to stop or reverse starting, the electronic control system ensures that the running motor transitions from fast to smooth to slow speed, and then stops running. Thereby improving the operating performance and operating indicators of the crane, reducing the number of start-ups of electrical equipment, and improving the electrical life and reliability of the crane.
Conditions of use
The voltage of the main circuit and control circuit of the crane electrical system controlled by the cab are ~ 380V, 48V 50HZ.
The ground control crane electrical system main circuit and control circuit voltage are ~ 380V, 48V 50HZ.
Working conditions of electronic control equipment:
(1) Below 2000 meters above sea level;
(2) The ambient air temperature is not higher than + 40 ℃ and not lower than -25 ℃;
(3) The fluctuation of the power grid is within ± 10%;
(4) The relative humidity does not exceed 85%;
(5) Where there is rain, snow and no water vapor.
If the actual conditions of use do not match the above, please specify when ordering.
The operation of various crane mechanisms is divided into remote control operation and ground buttons
Box manipulation. The electrical control cabinet is installed on the walking platform near the end beam of the crane bridge
In the electrical control cabinet, there are operation controllers, main power switches,
Emergency switch, switch for electric bell and other equipment. There are emergency switches and operation control buttons of each mechanism on the button box. I-steel is used as the rail and new type trolley for the trolley cable conduction. The bridge walking platform is equipped with centralized control electrical control box and cable trough electrical equipment. The electrical equipment is described as follows:
(1) Linkage station control
The linkage control console is used to directly control the start, speed adjustment, reversing, braking and stopping of the translation mechanism and the lifting mechanism. It is arranged around the window in front of the operation room.
(2) This crane adopts the centralized control method, which is used to
AC motor overload protection and loss of pressure, zero position, safety and limit protection of various agencies. It cooperates with the master controller to control the operation of the motors of various institutions,
It also provides power, control and lighting circuit power. The electric control box is equipped with a general connection
Contactors, fuses, control AC contactors, time relays, etc.
(3) Limit and safety switch
Crane operation, trolley operation and hoisting mechanism are equipped with limit switches, to block the movement of various agencies.
Parts Of Crane
Contact Person: sales